squish

英 [skwɪʃ]

美 [skwɪʃ]

v.  (被)压坏，挤坏; 发吧唧声; 发吱嘎声

过去分词：squished　过去式：squished　现在分词：squishing　第三人称单数：squishes　

BNC.48495 / COCA.19433

牛津词典

verb

• （被）压坏，挤坏
  if sth soft squishes or is squished , it is crushed out of shape when it is pressed
• 发吧唧声；发吱嘎声
  to make a soft wet sucking sound

英英释义

noun

• the noise of soft mud being walked on

verb

• put (a liquid) into a container or another place by means of a squirting action
• walk through mud or mire
  1. We had to splosh across the wet meadow
  Synonym:squelchsplashsploshsloshslop

双语例句

• The squish patterns in engine piston bowls with different geometry are visualized by the method of oil streak in a motored single cylinder test engine.
  本文在一个拖动的单缸实验机上，利用油点条痕法显示了活塞上燃烧室凹坑中挤流运动的流谱，研究了燃烧室形状和几何尺寸对挤流谱的影响。
• The air motion and squish effect inside the cylinder of a diesel with a cylindrical bowl has been computed, and the results have been analysed in this paper.
  本文对圆柱形燃烧室缸内空气流动、挤流作用进行了模拟，并对计算结果进行了分析。
• Study on Combustion Chamber Squish Velocity and Heat Release in a Moped 2-stroke Engine
  二冲程汽油机燃烧室挤流和放热规律的研究
• It'll help squish out all that water I've been retaining.
  它能帮我把我一直保持的水份全都挤出来。
• Use the Gradient Tool ( G) to squish and reposition the gradients.
  应用渐变工具（G）调整渐变的形态和位置。
• Valves are clustered near the center of the bore to minimize combustion chamber volume and to provide ample squish area.
  阀门是聚集在附近的孔中心，以尽量减少燃烧室量，以及提供足够的果酱领域。
• A complete electric resistance furnace with all-fibred, double top of furnace, high emissive coating, protective enhancement coating, directive emission-enhancement heating elements, automatic furnace door squish mechanism and movable shroud was obtained, and its structural characteristic and energy saving theory was discussed.
  介绍了采用全纤维、双炉台、高发射率涂料、保护增强涂料、定向增强辐射加热元件、自动炉门压紧机构、移动罩式等技术制造的节能电阻炉的结构特点和节能原理。
• As the small and medium sized high-speed direct injection diesel engine needs strong intake swirl, squish compression and combustion turbulence, its intake port generally made spiral or tangential shape.
  对于中小型高速直喷式柴油机，因其需要较强的进气涡流、压缩挤流和燃烧紊流，其进气道一般做成螺旋的或切向的形状。
• The reflected spray distributes at squish zone and concave zone of combustion chamber, big swirl of spray is obtained and expand to more domains.
  反射后的油束分布在燃烧室的挤流区和凹坑区，形成大的油束涡流，并向较大范围扩展。
• The effect of swirl strength on particulate emission at medium speed operating condition was not significant because the squish and expansion swirl generated by piston movement could meet the needs of fuel combustion.
  中速工况气缸内形成的挤气涡流和膨胀涡流基本可以满足燃料燃烧的需求，涡流强度在一定范围内的变化对降低柴油机排气微粒贡献不大。